The machine is constructed of single line horizontal boring unit.
The boring unit can be changed from horizontal to vertical drilling by pneumatic setting.
The boring unit can be titled manually for angular drilling. Entire boring cycle can fast and conveniently accomplished by pressing on the foot switch.
Drill feed speed can be conveniently adjusted on control panel.
Standardly furnished with 21/27-Spindle boring head (HS-27T), or 35-Spindle boring head (HS-35T)
Two fences provides convenient positioning of the workpiece.
Mechanical digital readouts are provided for each boring unit, providing accurate adjustment.
The speed stabilizer is available, providing smooth feeding aginst the workpiece.
The depth of drilling is controlled by six boring depths selector.
Fences:*Two fences are provided for drilling small and big panels. *The rule gauge is equipped with 4 adjustable stoppers for repetitive drilling operations.
*the rule gauge is set crosswisely for cross drilling operations.
Quickly chucks provide convenient fitting and dismantling for boring bits. Standardly attached with 1/3 pcs.
MODEL
B-21
Max. distance between center
32mm
Number of spindle per boring head
21
Max. drilling depth
75mm
Table size
872 x 490mm
Boring head adjustment
0°~90°
Spindle speed
2800rpm
Motor
2.5HP
N.W./G.W.
350kgs/430kgs
Machine size
968 x 820 x 1220mm
Packing size
1143 x 889 x 1372mm
45"*35"*54"
* Specifications subject to change without prior notice.
